High Quality Plate Lining Tetrafluoroethane Section

High Quality Plate Lining Tetrafluoroethane Section
Product Details

Plate lining tetrafluoroethane section
Process Description:
Tight lining using teflon panels which has been activating treatment or covered with fiberglass cloth,then sandblasting the equipment to Sa2 level,and cleaned with detergent,then paste teflon panels inside the equipment.Resistance to negative pressure up to 0.095 Mpa.We choose the most appropriate lining material and thickness according to the different requirements of customers.Thistechnique is not liminted by the size and shape of the equipment,but also solve the problems of cleanliness、temperature and corrosion resistance in the chemicals industry.It has well anti-pemeability、glossy surface、small COF、long service life etc.
Lining materials and properties:
Our PTFE,PFA panels is imported from the Eurpean Union,it has glossy surface and uniform thickness,Width of 1.2meters,length of 25meters.Compared with the traditional panels,it can reduce welding cracks.
The difference between imported and domestic teflon panel:

1.All imported teflon panels are manufactured in clean room,its cleanliness much better than domestic panels,so its effective anticorrosion thickness more than domestic panels.

2.The eu’s four fluorine has been developed in recent decades,its production processes and procedures is more reasonable than domestic panels',Mainly manifested (3.15-3.2g/cm3)in the density and thickness (3-3.15mm)of the panel are attach more importance to the balance.

3.Activating treatment effect will directly affect its strength of adhesion sheet. The activation processing technology of EUis the best in the word,its adhesion reaches-0.05Mpa without any technical processing,this is domestic panel cannot be achieved.

PTEE(F4)
Longtime working temperature is 120℃~130℃,and able to withstand 150 degree in a moment.Against high pressure capability sync with the equipment and resistance to negative pressure reached -0.07~-0.08Mp,it is the most cost-effective material currently.
PFA
Longtime working temperature is 200℃~220℃,resistance high pressure capability sync with the equiment,covered with glass fabric to reinforced adhesive function,Adopt unique resistance to negative pressure technology of our company,it can reach to -0.09--0.095Mpa.
PVDF(F2)
Longtime working temperature is 100℃~110℃,against high pressure capability sync with the equipment and resistance to negative pressure reached-0.07~-0.08Mpa,its anticorrosion ability less than PTFE.
ECTEE(F3)
Longtime working temperature is 100℃~110℃,against high pressure capability sync with the equipment and resistance to negative pressure reached-0.07~-0.08Mpa,Because of the fluorine content low than PTFE,thus its anticorrosion ability less than PTFE.

Professional as one of the leading PTFE equipment manufacturers and suppliers in China, we now bring you a large selection of high quality plate lining tetrafluoroethane section from our professional factory. Welcome to buy or wholesale the famous brands' equipment with us, and the customized product is also available.

Feedback